Maintenance and repair of aluminum alloy processing equipment

 Industry News     |      2018-07-02 12:07
The maintenance content of aluminum alloy processing equipment generally includes daily maintenance, regular maintenance, periodic inspection and accuracy inspection.
 
The daily maintenance of aluminum alloy processing equipment is the basic work of equipment maintenance and must be institutionalized and standardized. For the regular maintenance work of aluminum alloy processing equipment, work quotas and material consumption quotas shall be established, and assessments shall be made according to the quotas. Regular maintenance of aluminum alloy processing equipment shall be included in the assessment content of the workshop contract responsibility system. Regular inspection of aluminum alloy processing equipment is a planned preventive inspection. In addition to human senses, inspection tools and instruments are also required.
 
The aluminum alloy processing equipment maintenance regulations are the requirements and regulations for the daily maintenance of equipment, and the maintenance procedures for aluminum alloy processing equipment are performed. The service life of aluminum alloy processing equipment can be extended to ensure a safe and comfortable working environment. Its main content should include:
      (1) The operation content and working method of the aluminum alloy processing equipment should be neat, clean, sturdy, lubricated, anti-corrosive, safe, etc.
Work tools and materials used, standards and precautions;
      (2) Parts, methods and standards for daily inspection, maintenance and regular inspection of aluminum alloy processing equipment;
      (3) Check and evaluate the contents and methods of the degree of maintenance of aluminum alloy processing equipment by operating workers.
 
       Maintains the performance and technical condition of aluminum alloy processing equipment, and processes aluminum alloys through general methods such as wiping, sweeping, lubricating and adjusting.
Equipment for care, the specific operations are as follows:
      (1) Cleaning: Inside and outside of the aluminum alloy processing equipment are clean and free from oil contamination in sliding surfaces, screw shafts, racks, gear boxes, oil holes, etc.
The oil does not leak or leak, and the chips, debris and dirt around the equipment should be cleaned;
      (2) Aluminium alloy processing equipment is well lubricated: refueling or oil change on time, continuous oil, no dry friction, normal oil pressure, bright oil mark, oil
The road is smooth, oil meets the requirements, oil guns, oil cups, linoleum clean;
      (3) Safety: Observe the safety operation rules, and use the aluminum alloy processing equipment without overload; the safety protection device for the aluminum alloy processing equipment
Reliable and timely eliminate insecurity.
 
 
More aluminum doors and windows equipment information, please pay attention to the Jinmai Da official website, WeChat, Weibo.