Winter maintenance measures for doors and windows

 Industry News     |      2018-07-02 11:43
Jinmaida, a professional manufacturer of door and window equipment, reminds you that when the winter arrives and the temperature drops, the equipment will have such problems under low temperature conditions. In order to allow customers to better use the equipment, we have deliberately put out the following precautions to provide you with A set of winter windows and doors equipment maintenance program for the majority of industry readers reference!
 
 
A: milling and cutting equipment (double-head saws, end milling, copy milling, angle saws, aluminum-wood milling and milling machines, aluminum wood milling machines, 90-degree cutting saws, etc.)
 
1. Every day after work, it is necessary to clean the aluminum (wood) chips on the equipment, especially the transmission parts and moving parts of the equipment (such as: guide rails, cylinders, work panels, etc.);
2. Regularly check the screws on various parts of the equipment to prevent loosening, resulting in accuracy errors and safety accidents.
3. Regularly wipe more dilute lubricants (eg, linear guides) for each drive shaft of the equipment.
4. The aluminum machine selects oily cutting fluid, and the ratio of watering is appropriately reduced;
5. Check the air circuit of the equipment and the valve body of the solenoid valve for icing phenomenon before starting work every day to ensure that the air path is smooth and then use the equipment. In order to avoid air passage icing, it is necessary to discharge the air compressor every day and replace the filter element.
6. Check whether the power switch is normal every day and whether the wire is aging. If there is any problem, replace it immediately.
7, aluminum profiles, wood and other light to prevent bumps, resulting in equipment damage and other errors.
8. It is forbidden to use gloves to operate the equipment and it is forbidden to wear gloves. Do not wear scarves or similar clothing to prevent accidents.
 
 
Two: assembly equipment (broken bridge angle machine, aluminum wood frame machine, etc.)
1. Clean up aluminum (wood) chips and sludge from the equipment table area.
2. Lubricate the moving parts of the countertop with lubricants;
3. Hydraulic oil of the angle grinder should be filled with 32# hydraulic oil as much as possible, and it is recommended to replace the hydraulic oil for half a year.
4. Check the air circuit of the equipment and the valve body of the solenoid valve for icing phenomenon before starting work every day to ensure that the air path is smooth and then use the equipment. In order to avoid air icing, air compressors must be drained every day to replace filter elements.
5. Regularly inspect the screws of various parts of the equipment to prevent loosening, resulting in accuracy errors and safety accidents.
6. Check whether the power switch is normal every day and whether the wire is aging. If there is any problem, replace it immediately.
7, aluminum profiles, wood and other light to prevent bumps, resulting in equipment damage and other errors.
8. It is forbidden to use gloves to operate the equipment and it is forbidden to wear gloves. Do not wear scarves or similar clothing to prevent accidents.