Door and window equipment summer maintenance measures

 Industry News     |      2018-07-02 11:40
The professional door and window equipment manufacturer Jin Maida reminds you that when the summer arrives and the temperature rises, the door and window equipment is very prone to the problem of overheating. In order to allow customers to use the equipment better, we have deliberately put out the following precautions for you: Provide a set of winter windows and doors equipment maintenance program for the majority of industry readers reference!
 
 
A: Milling equipment (double cutting saws, end milling, copy milling, angle saws, aluminum wood milling and milling machines, aluminum wood milling machines, 90 degree cutting saws, etc.)
1. Every day after work, it is necessary to clean the aluminum (wood) chips on the equipment, especially the transmission parts and moving parts of the equipment (such as: guide rails, cylinders, work panels, etc.);
2. Regularly check the screws on various parts of the equipment to prevent loosening, resulting in accuracy errors and safety accidents.
3. Regularly wipe the lubricant on the shafts of the equipment (for example: linear guides);
4, aluminum machine to choose a more dilute cutting fluid, it is not recommended to water;
5. Check the equipment air circuit and solenoid valve body for water retention before daily operation to ensure that the air path is smooth and then use the equipment. In order to avoid water in the gas path, it is necessary to discharge the air compressor every day, and often replace the filter element.
6. Check whether the power switch is normal every day and whether the wire is aging. If there is any problem, replace it immediately.
7, aluminum profiles, wood and other light to prevent bumps, resulting in equipment damage and other errors.
8. It is forbidden to use gloves to operate the equipment and it is forbidden to wear gloves. Do not wear scarves or similar clothing to prevent accidents.
9, regular inspection of power lines, solenoid valves and other electrical components to prevent serious short circuits and other accidents!
10. When the equipment is running, pay attention to the operating status of the equipment to prevent the motor and oil pressure equipment from being overheated. If the temperature is abnormal, timely power-off and air-breaking will occur. Use the equipment after the temperature returns to normal.
Two: assembly equipment (broken bridge angle machine, aluminum wood frame machine, etc.)
1. Clean up aluminum (wood) chips and sludge from the equipment table area.
2. Lubricate the moving parts of the countertop with lubricants;
3. Hydraulic oil of the angle grinder should be filled with 32# hydraulic oil as much as possible, and it is recommended to replace the hydraulic oil for half a year.
4. Check the equipment air circuit and solenoid valve body for water storage before starting work every day to ensure the use of equipment after the air circuit is smooth. In order to avoid water in the airway, it is necessary to discharge the air compressor every day, and often replace the filter element.
5. Regularly check the screws of all parts of the equipment to prevent looseness, resulting in precision errors and safety accidents.
6. Check whether the power switch is normal every day and whether the wire is aging. If there is any problem, replace it immediately.
7, aluminum profiles, wood and other light to prevent bumps, resulting in equipment damage and other errors.
8. It is forbidden to use gloves to operate the equipment and it is forbidden to wear gloves. Do not wear scarves or similar clothing to prevent accidents.
9, regular inspection of power lines, solenoid valves and other electrical components to prevent serious short circuits and other accidents!
10. When the equipment is running, pay attention to the operating status of the equipment to prevent the motor and oil pressure equipment from being overheated. If the temperature is abnormal, timely power-off and air-breaking occurs. Use the equipment after the temperature returns to normal.